Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
CareOne Temple Touch Thermometer
CareOne Temple Touch Thermometer
1 ct
100% satisfaction guarantee
Place your order with peace of mind.
About
Details
CareOne® Temple Touch Thermometer.
Directions
Care and cleaning instructions: Wipe the probe with an alcohol swab or a cotton swab moistened with 70% isopropyl alchol before & after each use After cleaning wait at least 2 minutes before taking a measurement for the unit to readjust to room temperature. Use only a soft dry cloth to clean the body of the thermometer (if necessary). Never use an abrasive cleanser or submerge the thermometer in water or other liquids. Do not expose the thermometer to extreme temperatures, humidity, direct sunlight or shock. Store at room temperature. Quick start tips: 1.Press and release the power button, wait 2-seconds. 2.Hold unit family to temple until a long single beep is heard, 6-8 seconds. 3.Results will be displayed on the screen. 4.Wait one minute before new measurement. 5.To alternate between °F and °C, Press and hold the power button. Please read these instructions carefully This product is not intended to diagnose or treat any health problem or disease and should not be used as a substitute for the consultation and advice of a physician or other medical professional. Thermometers should only be used under the supervision of an adult. Before use, it is recommended that the patient avoid eating, drinking, smoking or exercising for at least twenty minutes prior to talking a measurement. Never walk, run or talk during a measurement. Normal body temperature/fever indicator: Body temperature can vary from 97°F and 100.0°F and still be considered normal the medically accepted normal body temperature is 98.6°F Body temperature is commonly lower in the upon walking than at any point during the rest of an individual’s walking hours. Temperature readings will vary based on the body location point of the reading. Average ‘normal’ temperature ranges by measurements location site: Forehead 97.0°F-100.0°F (36.1°C-37.8°C) Oral 97.0°F-100.0°F (36.1°C-37.8°C) Rectal 97.3°F-100.4°F (36.3°C-38.0°C) Axillary 95.4°F-99.0°F (35.2°C-37.2°C) A fever is defined as a body temperature that is elevated above the normal or that person. It is important to determine what is normal for an individual before determining. If a fever is present. Tracking an individual’s temperature on a consistent basis, at the same body site and at the same time everyday when the person is well or healthy will help determine an individual’s normal temperature. Guidelines for temple measurements This thermometer is designed to measure the temperature at the forehead, in proximity to the temple area between the end of the eyebrow and the hairline. Do not place the thermometer on scar tissue, skin disorder, open sores or abrasions or patients in trauma. Consult your physician when using drug therapies that may elevate skin temperature in the forehead. Do not use skin exposed to direct sunlight, fireplace heat, air conditioner or fan air flow, or hot/cold compress therapies. Wait at least one minute between measurements to allow the unit sensor to readjust to room temperature. If the thermometer has been stored in an excessively cold or warm environment, allow the thermometer to adjust to the ambient room temperature before use. Performance and operation of this unit may be compromised if operated outside of the specified temperature and humidity operating ranges. Operating instructions: 1.Press and release the power button to activate the thermometer. 2.The unit will beep and the thermometer will perform a self-test, showing all the symbols on the display. 3.The last measurement taken will shown on the display. 4.Gently place the probe in the center of the temple area between the end of the eyebrow and the hairline. Maintain firm contact with the skin, hold the thermometer to ensure reliable results. 5.Do not press the power button again. The measurements will start automatically once the probe is in place and will take approximately 6-8 seconds. A running circle will appear on the display indicating the reading is in progress. 6. The unit will sound one long beep when the measurement is complete and the reading will appear on the display. 7. To turn the unit off, simply press the power button. The unit will automatically shut-off after approximately one minute. Note: if you take another measurement before 1 minute has elapsed, the device will perform a 10 to 0 countdown to allow the device to reset for a new measurement. Do not try to measure during this countdown. If you attempt to measure during the countdown time, the device will display the previous result, beep 8 times and turn itself off automatically. Setting the operating scale or °C. The device setting is by default Fahrenheit(°). To change the scale to°C, or back to °F. 1.While off, press and hold the power button for 5 seconds, on the screen you will see the icon (°F,°C) Changes. 2. Release the button, the hourglass icon will disappear in 5 seconds indicating that the device is ready for use. Memory recall: This unit includes a recall of the last measurement taken. When the unit is OFF, press the power button to turn the unit on, and release. After the self-test, the unit will briefly show the last reading on the display. Replacing the battery. This thermometer includes 2 AAA 1.5V Batteries. The low-battery symbol will appear on the top center of the display when the battery needs to be changed. 1. Carefully slide the battery cap away from the unit. 2. Replace the batteries, taking care to match the correct polarity. 3. Carefully replace the battery cap. 4. Do not dispose of used batteries in the trash. Consult your local recycling center for the proper way to dispose the batteries in your area. Keep used batteries away from children, pets and excessive heat. Troubleshooting/ Identifying display symbols Performance may be degraded should one or more of the following occur: Operation outside stated temperature and humidity range. Storage outside state temperature and humidity range. Mechanical shock. Patient temperature is below ambient temperature. The thermometer has been designed to display feedback-warnings to ensure proper usage and accurate temperature measurement. When an error appears the device will “beep” 5 times, and then the thermometer will turn off automatically.
Warnings
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
About
Details
CareOne® Temple Touch Thermometer.
Directions
Care and cleaning instructions: Wipe the probe with an alcohol swab or a cotton swab moistened with 70% isopropyl alchol before & after each use After cleaning wait at least 2 minutes before taking a measurement for the unit to readjust to room temperature. Use only a soft dry cloth to clean the body of the thermometer (if necessary). Never use an abrasive cleanser or submerge the thermometer in water or other liquids. Do not expose the thermometer to extreme temperatures, humidity, direct sunlight or shock. Store at room temperature. Quick start tips: 1.Press and release the power button, wait 2-seconds. 2.Hold unit family to temple until a long single beep is heard, 6-8 seconds. 3.Results will be displayed on the screen. 4.Wait one minute before new measurement. 5.To alternate between °F and °C, Press and hold the power button. Please read these instructions carefully This product is not intended to diagnose or treat any health problem or disease and should not be used as a substitute for the consultation and advice of a physician or other medical professional. Thermometers should only be used under the supervision of an adult. Before use, it is recommended that the patient avoid eating, drinking, smoking or exercising for at least twenty minutes prior to talking a measurement. Never walk, run or talk during a measurement. Normal body temperature/fever indicator: Body temperature can vary from 97°F and 100.0°F and still be considered normal the medically accepted normal body temperature is 98.6°F Body temperature is commonly lower in the upon walking than at any point during the rest of an individual’s walking hours. Temperature readings will vary based on the body location point of the reading. Average ‘normal’ temperature ranges by measurements location site: Forehead 97.0°F-100.0°F (36.1°C-37.8°C) Oral 97.0°F-100.0°F (36.1°C-37.8°C) Rectal 97.3°F-100.4°F (36.3°C-38.0°C) Axillary 95.4°F-99.0°F (35.2°C-37.2°C) A fever is defined as a body temperature that is elevated above the normal or that person. It is important to determine what is normal for an individual before determining. If a fever is present. Tracking an individual’s temperature on a consistent basis, at the same body site and at the same time everyday when the person is well or healthy will help determine an individual’s normal temperature. Guidelines for temple measurements This thermometer is designed to measure the temperature at the forehead, in proximity to the temple area between the end of the eyebrow and the hairline. Do not place the thermometer on scar tissue, skin disorder, open sores or abrasions or patients in trauma. Consult your physician when using drug therapies that may elevate skin temperature in the forehead. Do not use skin exposed to direct sunlight, fireplace heat, air conditioner or fan air flow, or hot/cold compress therapies. Wait at least one minute between measurements to allow the unit sensor to readjust to room temperature. If the thermometer has been stored in an excessively cold or warm environment, allow the thermometer to adjust to the ambient room temperature before use. Performance and operation of this unit may be compromised if operated outside of the specified temperature and humidity operating ranges. Operating instructions: 1.Press and release the power button to activate the thermometer. 2.The unit will beep and the thermometer will perform a self-test, showing all the symbols on the display. 3.The last measurement taken will shown on the display. 4.Gently place the probe in the center of the temple area between the end of the eyebrow and the hairline. Maintain firm contact with the skin, hold the thermometer to ensure reliable results. 5.Do not press the power button again. The measurements will start automatically once the probe is in place and will take approximately 6-8 seconds. A running circle will appear on the display indicating the reading is in progress. 6. The unit will sound one long beep when the measurement is complete and the reading will appear on the display. 7. To turn the unit off, simply press the power button. The unit will automatically shut-off after approximately one minute. Note: if you take another measurement before 1 minute has elapsed, the device will perform a 10 to 0 countdown to allow the device to reset for a new measurement. Do not try to measure during this countdown. If you attempt to measure during the countdown time, the device will display the previous result, beep 8 times and turn itself off automatically. Setting the operating scale or °C. The device setting is by default Fahrenheit(°). To change the scale to°C, or back to °F. 1.While off, press and hold the power button for 5 seconds, on the screen you will see the icon (°F,°C) Changes. 2. Release the button, the hourglass icon will disappear in 5 seconds indicating that the device is ready for use. Memory recall: This unit includes a recall of the last measurement taken. When the unit is OFF, press the power button to turn the unit on, and release. After the self-test, the unit will briefly show the last reading on the display. Replacing the battery. This thermometer includes 2 AAA 1.5V Batteries. The low-battery symbol will appear on the top center of the display when the battery needs to be changed. 1. Carefully slide the battery cap away from the unit. 2. Replace the batteries, taking care to match the correct polarity. 3. Carefully replace the battery cap. 4. Do not dispose of used batteries in the trash. Consult your local recycling center for the proper way to dispose the batteries in your area. Keep used batteries away from children, pets and excessive heat. Troubleshooting/ Identifying display symbols Performance may be degraded should one or more of the following occur: Operation outside stated temperature and humidity range. Storage outside state temperature and humidity range. Mechanical shock. Patient temperature is below ambient temperature. The thermometer has been designed to display feedback-warnings to ensure proper usage and accurate temperature measurement. When an error appears the device will “beep” 5 times, and then the thermometer will turn off automatically.
Warnings
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.