Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
About
Details
Water Pump & Thermostat Housing RTV offers the highest water glycol resistance in an RTV silicone.
Directions
Directions: 1. For best results, surfaces should be clean and dry.2. Pierce top of tube and apply a continuous 1/16" to 1/4" (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.3. Let dry for one hour then tighten to torque specifications.4. Allow 24 hours to fully cure before filling with fluids or returning to service. 5. Replace cap after use. Precautionary Statements—Storage: Store in a well-ventilated place. Keep container tightly closed.
Precautionary Statements—Disposal: Dispose of contents/container to an approved waste disposal plant.
Warnings
WarningCauses serious eye irritation. May cause allergic skin reaction. Suspected of causing cancer. Precautionary Statements—Prevention: Contains 2-butanone oxime. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use personal protective equipment as required. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Keep out of the reach of children. Note: Not recommended for use on head gaskets or parts in contact with gasoline. Precautionary Statements—Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: get medical advice/attention. If on Skin: Wash with plenty of soap and water. if skin irritation or rash occurs: get medical advice/attention. Wash contaminated clothing before reuse.
About
Details
Water Pump & Thermostat Housing RTV offers the highest water glycol resistance in an RTV silicone.
Directions
Directions: 1. For best results, surfaces should be clean and dry.2. Pierce top of tube and apply a continuous 1/16" to 1/4" (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.3. Let dry for one hour then tighten to torque specifications.4. Allow 24 hours to fully cure before filling with fluids or returning to service. 5. Replace cap after use. Precautionary Statements—Storage: Store in a well-ventilated place. Keep container tightly closed.
Precautionary Statements—Disposal: Dispose of contents/container to an approved waste disposal plant.
Warnings
WarningCauses serious eye irritation. May cause allergic skin reaction. Suspected of causing cancer. Precautionary Statements—Prevention: Contains 2-butanone oxime. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use personal protective equipment as required. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Keep out of the reach of children. Note: Not recommended for use on head gaskets or parts in contact with gasoline. Precautionary Statements—Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: get medical advice/attention. If on Skin: Wash with plenty of soap and water. if skin irritation or rash occurs: get medical advice/attention. Wash contaminated clothing before reuse.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.