Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
Loctite Epoxy, Instant Mix
Loctite Epoxy, Instant Mix
0.47 fl oz
100% satisfaction guarantee
Place your order with peace of mind.
About
Details
Self mixing & precise application. 3200 PSI. Metal, wood, ceramic, stone, glass, tile & most plastics. A high-strength 2-part adhesive in an easy to use applicator. Final bond is high strength and weather, water and solvent resistant Fills voids and bonds uneven surfaces. Technical Data: Leave Undisturbed for: 20 minutes; Full Strength: 24 hours 3200 psi on steel; Cured from: translucent yellow solid; Application: 39 degrees F (4 degrees C) to 95 degrees F (35 degrees C). Withstands: -10 degrees F (-23 degrees C) to 120 degrees F (49 degrees C). Not Recommended for: PE, PP, non-stick coatings, nylon products, flexible materials, prolonged immersion in water or potable water systems. Made in China.
Directions
Surface Preparation - Protect work area. Surfaces should be clean, dry and tree of grease and oil. Roughen smooth surfaces for better adhesion. To Open and Dispense: 1. Hold syringe with nozzle end up and pull back slightly on plunger, allowing air bubbles to rise to top. 2. Snap cap off by pushing to the side. Do not twist. 3. Attach nozzle over syringe opening, push past prongs, and turn 90 degrees to lock in place. 4. Depress plunger to dispense epoxy directly onto one side of the surfaces to be bonded. Bonding - Join surfaces within 4 minutes of adhesive application. Immediately remove excess glue with mineral spirits or rubbing alcohol (follow the solvent manufacturer's instructions). The bond sets in 5-7 min. and achieves usable strength in 20 min. Closure - Remove and discard nozzle. Retract plunger slightly and wipe syringe tip. Remove cap from side holder and place on end of syringe.
Warnings
Danger: corrosive. Causes eye and skin burns. May cause allergic skin and respiratory reaction. May be harmful if absorbed through skin. Read carefully other cautions on back panel.
Danger: contains epoxy resin, polymercaptan and amine curing agents. Do not get in eyes or on skin. Do not breathe vapors. First aid: for eye contact, flush with water for 15 minutes, call a physician. For skin contact, wash thoroughly with soap and water, call a physician if symptoms persist. If swallowed, do not induce vomiting, call a physician. Keep out of the reach of children.
About
Details
Self mixing & precise application. 3200 PSI. Metal, wood, ceramic, stone, glass, tile & most plastics. A high-strength 2-part adhesive in an easy to use applicator. Final bond is high strength and weather, water and solvent resistant Fills voids and bonds uneven surfaces. Technical Data: Leave Undisturbed for: 20 minutes; Full Strength: 24 hours 3200 psi on steel; Cured from: translucent yellow solid; Application: 39 degrees F (4 degrees C) to 95 degrees F (35 degrees C). Withstands: -10 degrees F (-23 degrees C) to 120 degrees F (49 degrees C). Not Recommended for: PE, PP, non-stick coatings, nylon products, flexible materials, prolonged immersion in water or potable water systems. Made in China.
Directions
Surface Preparation - Protect work area. Surfaces should be clean, dry and tree of grease and oil. Roughen smooth surfaces for better adhesion. To Open and Dispense: 1. Hold syringe with nozzle end up and pull back slightly on plunger, allowing air bubbles to rise to top. 2. Snap cap off by pushing to the side. Do not twist. 3. Attach nozzle over syringe opening, push past prongs, and turn 90 degrees to lock in place. 4. Depress plunger to dispense epoxy directly onto one side of the surfaces to be bonded. Bonding - Join surfaces within 4 minutes of adhesive application. Immediately remove excess glue with mineral spirits or rubbing alcohol (follow the solvent manufacturer's instructions). The bond sets in 5-7 min. and achieves usable strength in 20 min. Closure - Remove and discard nozzle. Retract plunger slightly and wipe syringe tip. Remove cap from side holder and place on end of syringe.
Warnings
Danger: corrosive. Causes eye and skin burns. May cause allergic skin and respiratory reaction. May be harmful if absorbed through skin. Read carefully other cautions on back panel.
Danger: contains epoxy resin, polymercaptan and amine curing agents. Do not get in eyes or on skin. Do not breathe vapors. First aid: for eye contact, flush with water for 15 minutes, call a physician. For skin contact, wash thoroughly with soap and water, call a physician if symptoms persist. If swallowed, do not induce vomiting, call a physician. Keep out of the reach of children.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.