Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
About
Details
Quality since 1924. 1 1/2 in x 1 1/2 in or 1 1/2 in x 1 1/4 in. For P trap, S trap and IPS. For kitchen or bathroom. Compatible with brass plumbing. www.acehardware.com. Made in the USA. Manufactured in USA.
Directions
The J Bend is easy to install to your existing sink drain system. Installation Hint: Since it traps items that may fall into the drain and blocks gases from the waste drain system, water and dirt will be present in the existing trap. Place a bucket under the old trap before attempting to remove it. Tools Needed: Pipe or spud wrench (to remove old brass J Bend). Instructions: P or S type Trap: 1. Turn off water at the tap. 2. Remove old J Bend. 3. Remove inlet nut A from new J Bend and select 1-1/4 inch x 1-1/2 inch or 1-1/2 inch washer. 4. Place nut A and washer in tailpiece. 5. Put new J Bend into position. 6. Attach nut A and washer and nut B to J Bend as illustrated. Hand tighten. Run water to test for leaks. 1-1/2 inch IPS Sink Trap: Note: You may need to purchase a 1-1/2 inch iron pipe size threaded outlet elbow (Ace(hashtag)43787). 1. Turn off water at the tap. Remove old J Bend. 3. Remove out A from new J Bend and select 1-1/4 inch x 1-1/2 inch washer. 4. Place nut A and washer on tailpiece. 5. Remove and discard outlet nut and washer from J Bend. 6. Attach 1-1/2 inch Iron Pipe Size Threaded Elbow to J Bend and tighten nut B. 7. Position trap and hand tighten nut A to J Bend and C to threaded connection. Run water to test for leaks. Note: These parts are designed for a hand-tight installation. Pipe thread compound is not required.
About
Details
Quality since 1924. 1 1/2 in x 1 1/2 in or 1 1/2 in x 1 1/4 in. For P trap, S trap and IPS. For kitchen or bathroom. Compatible with brass plumbing. www.acehardware.com. Made in the USA. Manufactured in USA.
Directions
The J Bend is easy to install to your existing sink drain system. Installation Hint: Since it traps items that may fall into the drain and blocks gases from the waste drain system, water and dirt will be present in the existing trap. Place a bucket under the old trap before attempting to remove it. Tools Needed: Pipe or spud wrench (to remove old brass J Bend). Instructions: P or S type Trap: 1. Turn off water at the tap. 2. Remove old J Bend. 3. Remove inlet nut A from new J Bend and select 1-1/4 inch x 1-1/2 inch or 1-1/2 inch washer. 4. Place nut A and washer in tailpiece. 5. Put new J Bend into position. 6. Attach nut A and washer and nut B to J Bend as illustrated. Hand tighten. Run water to test for leaks. 1-1/2 inch IPS Sink Trap: Note: You may need to purchase a 1-1/2 inch iron pipe size threaded outlet elbow (Ace(hashtag)43787). 1. Turn off water at the tap. Remove old J Bend. 3. Remove out A from new J Bend and select 1-1/4 inch x 1-1/2 inch washer. 4. Place nut A and washer on tailpiece. 5. Remove and discard outlet nut and washer from J Bend. 6. Attach 1-1/2 inch Iron Pipe Size Threaded Elbow to J Bend and tighten nut B. 7. Position trap and hand tighten nut A to J Bend and C to threaded connection. Run water to test for leaks. Note: These parts are designed for a hand-tight installation. Pipe thread compound is not required.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.