Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
Loctite Epoxy, Plastic Bonder, Opaque Amber
Loctite Epoxy, Plastic Bonder, Opaque Amber
0.85 fl oz100% satisfaction guarantee
Place your order with peace of mind.
About
Details
Fuses plastics. 20 min setting time. 3450 PSI. PVC, polycarbonate, acrylic, ABS, FRP, & many other plastics. Resistant to solvents, gasoline, diesel fuel and motor oil. Extremely resistant to high humidity, moisture and impact. Technical Data: Leave undisturbed for: 60 minutes. Full strength: 24 hours, 3450 psi on cold rolled steel. Cured form: Translucent yellow solid. Application: 39 degrees F (4 degrees C) to 70 degrees F (35 degrees C). Withstands: -40 degrees F (-40 degrees C) to 180 degrees F (82 degrees C). Not recommended for: PE, PP, non-stick coatings, prolonged immersion in water or potable water systems.
Directions
Preparation: Protect work area. Surfaces should be clean, dry and free of grease or oil. To clean surfaces, wipe plastics with rubbing alcohol, for better adhesion, roughen smooth surfaces with 220 grit sandpaper prior to cleaning. How to Open and Mix: 1.Remove cap from plunger. 2. Pull plunger back slightly and cut off end tips of syringe. 3. Turn nozzle end up lo allow air bubbles to rise to top. Press plunger to expel air 4. Dispense Resin-Hardener in equal amounts on a clean, discardable surface. 5. Mix thoroughly with a discardable stick (not included). Application: Apply to surfaces to be filled or bonded. Join surfaces and support parts until bond sets (approx. 20 mil). Clean Up: Remove excess glue immediately with rubbing alcohol, denatured alcohol or mineral spirits Wipe syringe tips clean, retract plunger slightly and close with the cap provided. Storage: Store in dry area below 75 degrees.
Warnings
Flammable. May cause allergic skin reaction. Irritant. Contains methyl methacrylate. Flammable liquid and vapor. Causes eye, skin and respiratory tract irritation. May cause allergic skin reaction. May be harmful if swallowed. Keep away from heal, sparks and flame. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Keep container closed when not in use. Use only with adequate ventilation. First Aid: If in eyes or on skin, rinse with water for at least 15 minutes. Obtain medical attention if symptoms develop or persist. If inhaled, remove to fresh air. If swallowed, do not induce vomiting. Get medical attention. Keep out of the reach of children. This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
About
Details
Fuses plastics. 20 min setting time. 3450 PSI. PVC, polycarbonate, acrylic, ABS, FRP, & many other plastics. Resistant to solvents, gasoline, diesel fuel and motor oil. Extremely resistant to high humidity, moisture and impact. Technical Data: Leave undisturbed for: 60 minutes. Full strength: 24 hours, 3450 psi on cold rolled steel. Cured form: Translucent yellow solid. Application: 39 degrees F (4 degrees C) to 70 degrees F (35 degrees C). Withstands: -40 degrees F (-40 degrees C) to 180 degrees F (82 degrees C). Not recommended for: PE, PP, non-stick coatings, prolonged immersion in water or potable water systems.
Directions
Preparation: Protect work area. Surfaces should be clean, dry and free of grease or oil. To clean surfaces, wipe plastics with rubbing alcohol, for better adhesion, roughen smooth surfaces with 220 grit sandpaper prior to cleaning. How to Open and Mix: 1.Remove cap from plunger. 2. Pull plunger back slightly and cut off end tips of syringe. 3. Turn nozzle end up lo allow air bubbles to rise to top. Press plunger to expel air 4. Dispense Resin-Hardener in equal amounts on a clean, discardable surface. 5. Mix thoroughly with a discardable stick (not included). Application: Apply to surfaces to be filled or bonded. Join surfaces and support parts until bond sets (approx. 20 mil). Clean Up: Remove excess glue immediately with rubbing alcohol, denatured alcohol or mineral spirits Wipe syringe tips clean, retract plunger slightly and close with the cap provided. Storage: Store in dry area below 75 degrees.
Warnings
Flammable. May cause allergic skin reaction. Irritant. Contains methyl methacrylate. Flammable liquid and vapor. Causes eye, skin and respiratory tract irritation. May cause allergic skin reaction. May be harmful if swallowed. Keep away from heal, sparks and flame. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Keep container closed when not in use. Use only with adequate ventilation. First Aid: If in eyes or on skin, rinse with water for at least 15 minutes. Obtain medical attention if symptoms develop or persist. If inhaled, remove to fresh air. If swallowed, do not induce vomiting. Get medical attention. Keep out of the reach of children. This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.