Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
About
Details
7/16 Inches Crown x 1 3/4 inches Leg; 11mm x 44mm. ASM A 641 – Reg. Galv. Kyocera Senco. Code recognized ICC-ES ESR-1539 formerly NER272; Engineered construction nails; ASTM F1667; Bend yield greater than 100.000 PSI. Galvanization on fasteners is intended to extend the life of the fastener. It does not eliminate corrosion and/or staining due to various conditions such as high humidity, salt spray, acidity content of preservatives in the wood (such as cedar, redwood, or man made materials). Fits other tools. www.senco.com. For additional information about safe tool use, triggering systems or to obtain a free trigger of your choice, call 1-800-543-4596 or visit us at www.Senco.com. ISANTA Member. Made in USA.
Directions
Senco offers different triggering systems. The following will assist you in choosing the trigger that best fits your application and method of operation. With a sequential or restrictive trigger, fasteners can only be driven one way. Depress the safety against the work piece first, then pull the trigger. Under certain conditions, the sequential trigger may reduce the possibility of injury to you and others working in your area. A sequential trigger is available for all Senco tools with a safety element. With a contact actuation or dual action trigger, fasteners can be driven two ways. First, depress the safety, then pull the trigger. Second. Pull the trigger and keep it pulled while continually depressing the safety against the work piece. Under certain conditions, double fire, excessive rebound and leaving your finger on the trigger of a contact actuation trigger can result in injury to you and others working in your area. A contact actuation trigger is available for most Senco tools with the exception of some finish milers and staplers. With a selective actuation or switchable trigger, fasteners can be driven in either the sequential or contact actuation mode. A button on the tool allows the user to switch between the two triggering systems as necessary depending upon the application. A selective actuation trigger is available on a limited number of Senco tools. Follow instructions for all building materials to minimize the potential for staining.
Warnings
Danger: Read and understand this warning and all other warnings and inspection instructions in operator’s manual before using the tool. Failure there instructions will result in serious injury to operator and/or others. Always wear OSHA-required Z87 safety glasses with permanently attached side shields. Keep finger off trigger when not driving fasteners since tool can eject fastener if safety is bumped.
About
Details
7/16 Inches Crown x 1 3/4 inches Leg; 11mm x 44mm. ASM A 641 – Reg. Galv. Kyocera Senco. Code recognized ICC-ES ESR-1539 formerly NER272; Engineered construction nails; ASTM F1667; Bend yield greater than 100.000 PSI. Galvanization on fasteners is intended to extend the life of the fastener. It does not eliminate corrosion and/or staining due to various conditions such as high humidity, salt spray, acidity content of preservatives in the wood (such as cedar, redwood, or man made materials). Fits other tools. www.senco.com. For additional information about safe tool use, triggering systems or to obtain a free trigger of your choice, call 1-800-543-4596 or visit us at www.Senco.com. ISANTA Member. Made in USA.
Directions
Senco offers different triggering systems. The following will assist you in choosing the trigger that best fits your application and method of operation. With a sequential or restrictive trigger, fasteners can only be driven one way. Depress the safety against the work piece first, then pull the trigger. Under certain conditions, the sequential trigger may reduce the possibility of injury to you and others working in your area. A sequential trigger is available for all Senco tools with a safety element. With a contact actuation or dual action trigger, fasteners can be driven two ways. First, depress the safety, then pull the trigger. Second. Pull the trigger and keep it pulled while continually depressing the safety against the work piece. Under certain conditions, double fire, excessive rebound and leaving your finger on the trigger of a contact actuation trigger can result in injury to you and others working in your area. A contact actuation trigger is available for most Senco tools with the exception of some finish milers and staplers. With a selective actuation or switchable trigger, fasteners can be driven in either the sequential or contact actuation mode. A button on the tool allows the user to switch between the two triggering systems as necessary depending upon the application. A selective actuation trigger is available on a limited number of Senco tools. Follow instructions for all building materials to minimize the potential for staining.
Warnings
Danger: Read and understand this warning and all other warnings and inspection instructions in operator’s manual before using the tool. Failure there instructions will result in serious injury to operator and/or others. Always wear OSHA-required Z87 safety glasses with permanently attached side shields. Keep finger off trigger when not driving fasteners since tool can eject fastener if safety is bumped.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.