Free delivery on first 3 orders. Terms apply.

Fast delivery

Get in as fast as 1 hour

It’s all local

Shop your favorites

Direct chat

Connect with shoppers

EZ Pour Replacement Spout and Vent Kit, Hi-Flo
EZ Pour Replacement Spout and Vent Kit, Hi-Flo

EZ Pour Replacement Spout and Vent Kit, Hi-Flo

1 each
EZ Pour Replacement Spout and Vent Kit, Hi-Flo

EZ Pour Replacement Spout and Vent Kit, Hi-Flo

1 each

100% satisfaction guarantee

Place your order with peace of mind.


KrogerKroger Delivery NowCostcoMeijerALDICVS®Fresh Thyme MarketALDI ExpressSam's ClubMeijer Express DeliveryWalgreensGordon Food ServicePetcoMarket DistrictLowe'sLucky's MarketMichaelsSephoraRestaurant DepotStaplesBJ's Wholesale ClubWeiland's MarketFresh Thyme Real ConvenienceJD SportsDICK'S Sporting GoodsOffice Depot OfficeMaxBest BuyGiant EagleFamily DollarPetSmartFive BelowThe Vitamin Shoppe®Dollar TreeSave A LotTarget: Fast DeliveryThe Container StoreCarfagna's MarketBig LotsBath & Body WorksGolf GalaxyFinish LineThe Wine ShopPublic LandsKohl's

Kitchen Tropical Mango Veggie Smoothie

About

Details

Kit comes complete with spout, cap, 8 inch spout extension, and replacement vent for 1/2 inch hole. Don't throw away those old cans use EZ-Pour. Only use on portable fuel containers manufactured prior to Jan. 1, 2009. Fast fueling, for off road equipment, tractors, bobcats, boats, wave runners, and more. Will not fit in unleaded automobile gas tanks. Large 7/8 inch opening. 8 inch spout extension included for those hard to reach tanks. Includes flame arrestor! Includes 1/2 inch vent. Now includes cap holder strap! This product is not CARB compliant. Not for sale or use in CA, CT, DC, DE, MA, ME, MD, NH, NJ, NY, OH, and VA. www.EzPourSpout.com.


Directions

Only for use on a fuel containers manufactured prior to Jan, 1 2009. Kit contains 2 base caps with different thread designs. Test each cap and utilize the one that best fits your container. Before use, test flexibility of spout for defects by bending gently back and forth. Spout is made of plastic and is made to flex, not to be bent 90 degrees or breakage may occur. After spout has been used, do not remove spout from base cap. Gasket is made to expand, removal and reinstallation may damage gasket and leaks may occur. The black cap generally fits the Rubbermaid, Gott and Essence, and Briggs. Yellow generally fits Blitz, Midwest and Wedco. Warning: Improper fit or use may cause fire - do not use if spout does not fit and seal to container. After use of this nozzle, replace spout cap to seal container, and close vent if one is present. To replace vent, pry old vent out and push new vent in. Keep vent closed when not in use. To install new vent on water jugs, drill a 1/2 hole in back topside of jug using a paddle bit (wood speed bit) and push new vent in. (Clean out jug to remove shavings). This product is not CARB compliant. Not for use in CA, CT, DC, DE, MA, ME, MD, NH, NJ, NY, OH, PA, and VA. To install cap holder, wrap strap around top spout corrugation, run one end through hole and tighten until secures over bumps, then push strap through cap hole from bottom. To extend spout, remove flame arrestor from spout to be used as the extension and screw on to the spout attached to the can. Do not remove flame arrestor from spot attached to can.


Warnings

Tank will fill quickly, watch for overflow! Hi-Flo spout tip will not fit in unleaded vehicle tanks. Lubricate extension threads before assembly. When installing extension, tighten until extension rides over sealing ridge. Do not use on hot engine.

About

Details

Kit comes complete with spout, cap, 8 inch spout extension, and replacement vent for 1/2 inch hole. Don't throw away those old cans use EZ-Pour. Only use on portable fuel containers manufactured prior to Jan. 1, 2009. Fast fueling, for off road equipment, tractors, bobcats, boats, wave runners, and more. Will not fit in unleaded automobile gas tanks. Large 7/8 inch opening. 8 inch spout extension included for those hard to reach tanks. Includes flame arrestor! Includes 1/2 inch vent. Now includes cap holder strap! This product is not CARB compliant. Not for sale or use in CA, CT, DC, DE, MA, ME, MD, NH, NJ, NY, OH, and VA. www.EzPourSpout.com.


Directions

Only for use on a fuel containers manufactured prior to Jan, 1 2009. Kit contains 2 base caps with different thread designs. Test each cap and utilize the one that best fits your container. Before use, test flexibility of spout for defects by bending gently back and forth. Spout is made of plastic and is made to flex, not to be bent 90 degrees or breakage may occur. After spout has been used, do not remove spout from base cap. Gasket is made to expand, removal and reinstallation may damage gasket and leaks may occur. The black cap generally fits the Rubbermaid, Gott and Essence, and Briggs. Yellow generally fits Blitz, Midwest and Wedco. Warning: Improper fit or use may cause fire - do not use if spout does not fit and seal to container. After use of this nozzle, replace spout cap to seal container, and close vent if one is present. To replace vent, pry old vent out and push new vent in. Keep vent closed when not in use. To install new vent on water jugs, drill a 1/2 hole in back topside of jug using a paddle bit (wood speed bit) and push new vent in. (Clean out jug to remove shavings). This product is not CARB compliant. Not for use in CA, CT, DC, DE, MA, ME, MD, NH, NJ, NY, OH, PA, and VA. To install cap holder, wrap strap around top spout corrugation, run one end through hole and tighten until secures over bumps, then push strap through cap hole from bottom. To extend spout, remove flame arrestor from spout to be used as the extension and screw on to the spout attached to the can. Do not remove flame arrestor from spot attached to can.


Warnings

Tank will fill quickly, watch for overflow! Hi-Flo spout tip will not fit in unleaded vehicle tanks. Lubricate extension threads before assembly. When installing extension, tighten until extension rides over sealing ridge. Do not use on hot engine.


Common questions

It's simple. Using the Instacart app or website, shop for products from your store of choice near you. Once you place your order, Instacart will connect you with a personal shopper in your area to shop and deliver your order. Contactless delivery is available with our "Leave at my door" option. You can track your order's progress and communicate with your shopper every step of the way using the Instacart app or website.

Learn more about how to place an order here.

Using the Instacart app or website, select a store of your choice near you that offers pickup, select Pickup, and then select your preferred pickup location from which you'd like to place your order.

Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.

Learn more about pickup orders here.

Here's a breakdown of Instacart delivery cost:

- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.

With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.

Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.

Learn more about Instacart pricing here.

When an item you want is out-of-stock at the store, your shopper will follow your replacement preferences.

You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:

- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.

Learn more about instructions for specific items or replacements here.

If something isn't right, you've got options. In the Instacart app or website, you can report:

- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders

If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.